ABS READER II USER GUIDE - OTC
ABS READER II USER GUIDE - OTC
ABS READER II USER GUIDE - OTC
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<br />
<strong>ABS</strong> Reader <strong>II</strong> User Guide<br />
ScanMate PC Software<br />
Software Screens<br />
This section contains an overview of the main screens<br />
in the <strong>ABS</strong> Reader <strong>II</strong> software. Some of the screens<br />
contain menus and others contain test instructions or<br />
results.<br />
Application Manager Screen<br />
When you turn on the <strong>ABS</strong> Reader <strong>II</strong> tool, the Application<br />
Manager screen appears. The Application<br />
Manager screen contains a menu of the groups of software<br />
installed in the <strong>ABS</strong> Reader <strong>II</strong> tool.<br />
Figure 1.9: Application Manager Screen<br />
From the Application Manager screen, select from the<br />
Programs available and then press the ENTER key. This<br />
displays the first Vehicle Identification screen.<br />
Vehicle Identification Screen<br />
Figure 1.10: Vehicle Identification Screen<br />
The Vehicle Identification screen has the following<br />
sections:<br />
• top section - displays the cable connections required for<br />
the vehicle.<br />
• bottom section - contains the function keys for:<br />
• entering new information for a vehicle,<br />
• selecting and reusing information for a vehicle previously<br />
tested,<br />
• viewing demonstration data.<br />
For detailed information about using this screen, refer<br />
to “Step 1: Enter the Vehicle Information” on page 13<br />
Vehicle Identification - Required Cables<br />
Screen<br />
Figure 1.11: Vehicle Identification - Required Cables Screen<br />
After you have entered all the information for a vehicle,<br />
the top section displays the vehicle information and the<br />
middle section displays the cable connections required<br />
for the vehicle.<br />
For detailed information about using this screen, refer<br />
to “Cables” on page 3 and “Step 2: Connect the<br />
Cable” on page 15.