AW #131.pdf - Karatunov.net

i i4*-
-l
fl Use a bridge shaped template to mark the
I \,f length of each limb (top of the bridge) and
to position the grooves for the string (underside
of the bridge).
es and a dust mask.
23. Draw a centerline along the length of the
bow. Mark the limb cut-off point and the string
groove location (Photo 10). Cut the limbs to length
on the bandsaw. Fiberglass is hard on blades, so use
an old one. If you plan to make a lot of bows, con-
sider buying a carbide blade.
24. Mark the limb tip shape (Photo 11).
25. Rough