food Marketing & Technology 3/2021

Processing
uses a pendant to hoist the bag into
the discharger frame. A Tele-Tube
telescoping tube pneumatically raises
a Spout-Lock clamp ring, allowing
an operator to make a high-integrity
sealed connection between the clean
side of the bag spout and the clean
side of the equipment.
With the bag spout secured, the
operator pulls its drawstring, allowing
presscake to discharge into the surge
hopper.
Releasing the telescoping tube’s air
pressure allows the clamp ring to
maintain constant downward tension
by gravity as the bag empties and
elongates to promote material flow.
Additional flow promotion is provided
by Flow-Flexer bag activators that
raise and lower opposite sides of the
bag bottom to promote complete
discharge through the bag spout.
The 226 l capacity surge hopper with
top-mounted enclosure is vented to a
side-mounted Bag-Vac dust collector
that creates negative pressure within
the sealed system to prevent displaced
air and dust from escaping into the
plant environment.
The enclosure also serves to contain
spillage that might otherwise escape
through seams in the bag and folds
> extruders > feeders > components > pneumatic conveying > complete systems
ZSK FOOD EXTRUDER.
DUAL USE EXTRUDER FOR
PLANT-BASED PRODUCTS.
+ Highly flexible dual use extruder for TVP and HMMA
+ Plant based ingredient material handling equipment from source to packaging
+ Proven industry leader with installed TVP and meat analogue systems globally
+ Strict adherence to cGMP guidelines and standards, FDA approved materials
+ High accuracy loss-in-weight feeding of powders and liquids
+ Worldwide service network
Coperion`s ZSK Mv PLUS food extruder for plant-based proteins in a hybrid design allows dual use for manufacturing
food meat Marketing substitute & products. Technology Both • TVP June and 2021 HMMA can be produced on the same extruder, realizing maximum
flexibility and profitably react to changing market demands. www.coperion.com/food-extruders
Key No. 99864
25