Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Peel Ply / Tear-Off Fabric<br />
The Peel Ply has been well-known in aircraft construction for many years. It is made of Nylon and is added into<br />
epoxy– or polyester resins as the first and/or final layer of the construction.<br />
After hardening, just before further processing it has to be peeled off slowly and in a sharp angle.<br />
This result is an overall rough, bondable upper surface free from lubricating film. Sanding or cleaning of the surface<br />
is not necessary before sticking or coating.<br />
The Peel Ply can‘t remain in the construction therefore a red or blue tracer thread is woven into the fabric.<br />
Advantages of working with Peel Ply Fabrics:<br />
• Accurate upper surface<br />
• A bit rough after tearing off, absolutely clean and free of dust<br />
• Ideal subsoil for bonding or further laminating / painting<br />
• Saves time, no need to grind with sand-paper or removing of grinding dust<br />
In some cases slip resistant components are required (e.g. stand space of surf boards, boat decks). After tearing<br />
off the Peel Ply the surface is ready for use.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
WEAVE<br />
STYLE<br />
THREADS/cm<br />
Warp / Weft<br />
YARN TYPE<br />
Warp/Weft<br />
WIDTH<br />
cm<br />
FIBRE<br />
TYPE<br />
HEAT<br />
RESISTANT<br />
HP-P83P3 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 3 Nylon 6.6 170 °C<br />
HP-P83P4 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 4 Nylon 6.6 170 °C<br />
HP-P83P5 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 5 Nylon 6.6 170 °C<br />
HP-P83P8 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 8 Nylon 6.6 170 °C<br />
HP-P83P10 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 10 Nylon 6.6 170 °C<br />
HP-P83P15 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 15 Nylon 6.6 170 °C<br />
HP-P83P20 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 20 Nylon 6.6 170 °C<br />
HP-P83P60 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 60 Nylon 6.6 170 °C<br />
HP-P83P60RB 83 Plain<br />
19 x 14 <strong>23</strong>5 dTex 60 PA 6.6 200 °C<br />
HP-P83P100 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 100 Nylon 6.6 170 °C<br />
HP-P83P100RB 83 Plain<br />
19 x 14 <strong>23</strong>5 dTex 100 PA 6.6 200 °C<br />
HP-P83P150 83 Plain<br />
19 x 16 <strong>23</strong>5 dTex 150 Nylon 6.6 170 °C<br />
HP-T105P25 105 Twill<br />
21 x 21 <strong>23</strong>5 dTex 25 Nylon 6.6 170 °C<br />
HP-T105P100 105 Twill<br />
21 x 21 <strong>23</strong>5 dTex 100 Nylon 6.6 170 °C<br />
HP-T105P125 105 Twill<br />
21 x 21 <strong>23</strong>5 dTex 125 Nylon 6.6 170 °C<br />
Vacuum Technology<br />
Different weights, constructions and widths are available upon request!<br />
1. Introduce the Peel Ply as the<br />
last layer<br />
2. After curing tear off the Peel Ply<br />
fabric<br />
3. Ideal surface for further works<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 37
Change language