Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Infusion-Resin / Laminating Resin<br />
15 min<br />
Article: HP-HTE15GL HARDENER<br />
Processing time approx. 15min. (at 20°C)<br />
Article: HP-HE3000GL<br />
RESIN<br />
200 min<br />
Article: HP-HTE200GL HARDENER<br />
Processing time approx. 200min. (at 20°C)<br />
300 min<br />
Article: HP-HTE300RGL HARDENER<br />
Processing time approx. 300min. (at 20°C)<br />
The basis of the series HP-E3000GL is an unfilled Epoxy-Resin, which is mixable with different hardeners for<br />
every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening<br />
at room temperature.<br />
The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.<br />
The series also has a high transparency, so that it is very suitable for visible carbon parts.<br />
Characteristics:<br />
• Extremely low viscosity, so it has a very good fibre wet-out<br />
• High static and dynamic strength<br />
• Pot life time can be freely adjusted between 15 min hardener (HP-E15GL) and 300 min (hardener HP-<br />
E300GL)<br />
• Glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
HE3000GL HTE15GL HTE200GL HTE300GL<br />
Colour colourless yellowish colourless, clear<br />
Colour<br />
gardner < 1 < 5 < 1 < 1<br />
Mixing ratio<br />
weight 100 30 30 30<br />
Pot life (at 20°C) minutes<br />
15 200 300<br />
Processing temperature optimum °C<br />
20 - 25 20 - 30 20 - 30<br />
Data of unfilled samples. Curing schedule with hardener :<br />
HP-E30RI h at °C 5h/60°C and 6h/80°C<br />
HP-E300RI h at °C 5h/60°C and 6h/80°C<br />
HP-E120RI h at °C 5h/60°C and 6h/80°C (and for Tg max. 2h/120°C)<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
66<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Change language