Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Polyester Non-Woven Absorber<br />
The non-woven absorber has a good drapeability.<br />
Ideal for the use in connection with components containing complex curvatures or acute radius. It absorbs the<br />
excess resin which is pressed through the Perforated Release Film. It can be used effectively in single or multiple<br />
layers.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
WEAVE<br />
THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
HP-VP80P 80 needled 2 80 185<br />
HP-VP150P 150 needled 3 - 4 130 185<br />
FIBRE TYPE<br />
Polyester black<br />
Polyester white<br />
Perforated Release Film<br />
High-tensible perforated Release Film. Ideal for the use in a vacuum bag / autoclave processing of composites<br />
and vacuum press method. Suitable for the use of polyester, epoxy and phenolic resin systems. Basic purpose of<br />
the Release Film is to ensure the proper release of the helping material from the component. The Release Film<br />
is placed directly on the Peel Ply in contact with the laminate. It separates the laminate from beather / bleeder<br />
fabrics, which have no release characteristics.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
THICKNESS<br />
µm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
ENLOGATION AT<br />
BREAK %<br />
MATERIAL<br />
HP-RF30/130 30 35 130 120 > 210 HDPE<br />
HP-RF44/100 30 44 100 120 > 210 HDPE<br />
HP-RF44/156 30 44 156 120 > 210 HDPE<br />
Vacuum Technology<br />
Vacuum Mesh / Infusion Mesh<br />
The Infusion Mesh has to be applied between the Vacuum Film and the Release Film to ensure the even flow of<br />
resin throughout the moulds surface. It is generally coloured in green for a better visual clarity. After the resin is<br />
cured it has to be removed from the surface of the mould area.<br />
ARTICLE<br />
WEIGHT<br />
g/m²<br />
THICKNESS<br />
mm<br />
WIDTH<br />
cm<br />
max. TEMPERATURE<br />
°C<br />
FIBRE TYPE<br />
HP-IM145/100 145 1,15 100 120 HDPE<br />
HP-IM<strong>23</strong>0/120 200 1 120 120 HDPE<br />
DRAPABILITY<br />
good<br />
not good<br />
IDEAL FOR<br />
COMPLEX<br />
PARTS<br />
IDEAL FOR<br />
LARGE, FLAT<br />
PARTS<br />
HP-IM145/100<br />
HP-IM<strong>23</strong>0/120<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 39
Change language