Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Epoxy-System for Aquariums and Terrariums<br />
Our terrarium / aquarium systems have been developed specifically for the use in these areas. The sealed surfaces<br />
are impact, scratch and bite resistant. The result is a waterproof barrier which can be easily cleaned and disinfected.<br />
A nesting of bacteria and pathogens into the ground is prevented.<br />
Features and Benefits:<br />
As Laminating and Covering System<br />
• Good wetting of the reinforcing fibres<br />
• Make clear and tack-free surface<br />
• Cold curing<br />
• Good strength<br />
• Sealing of metal, wood, various plastics and mineral substrates<br />
• High surface protection, excellent hygiene and water barrier<br />
• High impact resistance<br />
Aquarium and Terrarium Systems Compared:<br />
Technical<br />
Data Sheet<br />
Field of Application:<br />
Humid Terrariums<br />
Aquariums, paludariums<br />
Desert Terrariums<br />
high UV-resistance<br />
Underground<br />
Article<br />
Others<br />
low viscous<br />
for hard surfaces<br />
(OSB, stone, …)<br />
medium viscous<br />
for soft or non-porous<br />
surfaces<br />
(Styrofoam, …)<br />
low viscous<br />
for hard surfaces<br />
(OSB, stone, …)<br />
medium viscous<br />
for soft or non-porous<br />
surfaces<br />
(Styrofoam, …)<br />
HP-E45T HP-E45TM HP-E25TU HP-E25TMU<br />
Also suitable for<br />
saltwater aquariums<br />
Suitable for<br />
the use of UV lamps<br />
E = Epoxy Resin Systems; T = Terrarium system; M = medium viscous; U = at higher UV load<br />
Product Properties: HP-E45T HP-E45TM HP-E25TU HP-E25TMU<br />
Colour<br />
Mix ratio (resin : hardener) weight<br />
volume<br />
light yellow / clear<br />
Mixed viscosity (at 20°C) mPa s low viscous medium viscous low viscous medium viscous<br />
Pot life (at 20°C) minutes<br />
Tack-free<br />
hours<br />
Processing temperature (optimum) °C<br />
Processing temperature (minimum) °C<br />
Consumption as a sealing<br />
(unreinforced, unfilled)<br />
g/m²<br />
100:60 100:60 100:60 100:60<br />
100:66 100:70 100:64 100:66<br />
45 45 25 25<br />
48 48 24 24<br />
20 20 20 20<br />
15 15 10 10<br />
approxy 400g/m² (in two coats)<br />
Epoxy Resin Systems<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 71
Change language