Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Roller Coating Epoxy-System ▪ HP-E30RB<br />
The Epoxy-System HP-E30RB is a coloured (similar to RAL 7032 pebbly grey), solvent-free and filled two-component<br />
combination of resin and hardener with medium working time (pot life) suitable for high quality floor and<br />
wall coatings<br />
Features and Benefits:<br />
RAL 7032<br />
• Spreadable and rollable coating mass for floor and wall coatings<br />
• Very good adhesive properties, high abrasion-resistance<br />
(in combination with our primer/sealer HP-E80FS)<br />
• If needed, anti-slip material can be added. Please refer to the data sheet for further information<br />
• High mechanical strength and chemical resistance<br />
• High quality surface, easy to clean<br />
• Free of solvents, can be thinned with HP-XB upon demand (maximum up to 5 %)<br />
• Coloured, similar to RAL 7032 pebble grey, more colours upon request<br />
• Average consumption is between 0,4 - 0,6 kg/m² per layer<br />
• Free of substances of very high concerns (SVHC)<br />
Applicable on cement bonded surfaces:<br />
• For coatings of new and slightly porous surfaces<br />
• High quality surface finishing for walls and floors indoors and outdoors<br />
Epoxy Resin Systems<br />
Product Properties: Resin Hardener Method<br />
Mixing ratio<br />
weight<br />
HP-E30RB<br />
Mixed viscosity (at 20°C) viscous (self-leveling)<br />
Pot life (at 20°C) minutes<br />
Walkable after (at 20°C) hours<br />
Walkable after (at 15°C) hours<br />
Processing temperature (optimum) °C<br />
Processing temperature (minimum) °C<br />
Technical<br />
Data Sheet<br />
100 22<br />
30<br />
24<br />
48<br />
20 - 25<br />
15<br />
Online Shop<br />
76<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com
Change language