Delivery Program_01_23_Englisch

MTI ® VALVE - Automatic Valve for Vacuum Infusion -
Article: HP-VZ1450
Advantages:
• Regulates the infusion of resin independently
• No resin pooling at inlet point
• Fibres are evenly covered with resin
• Homogeneous laminate
• Optimum fibre volume ratio
• Highest quality of parts with reproducible
results
• Working hours and its costs can be saved
cross section
Video for more
information !!
Tube Clips
Squeezee® / Squeezer® allows an exact dosing of the resin flow and an easy disconnecting
of the resin line in the vacuum infusion.
Squeezee ® Squeezer ®
Article: HP-VZ1400
for hoses up to 15mm outer-Ø
Article: HP-VZ1425
for hoses up to 25mm outer-Ø
Advantages:
• Ideal for disconnecting all tube lines
• Requires only a minimum of force for disconnecting resin lines
• Exact dosing of the resin flow is possible
• Designed for the everyday, industrial application
• Suitable for tubes up to 15mm / 25mm outer diameter
Vacuum Technology
Spiral Hose Connector
Spiral hose connector for easy connection of the vacuum infusion pipe.
Suitable for 12 mm pipe (HP-VZ1020 / HP-VZ1040) and spiral hoses up
to 14,6 mm outside diameter (HP-ST080 / HP-ST100).
Infision Connector 12mm
For Pipe OD=12 mm (HP-VZ1020 / HP-VZ1040)
No imprints in the laminate and easy handling combined with the vacuum
flat channel HP-VZ1520 (50 mm) or HP-VZ1530 (100 mm).
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 43