Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Epoxy Primer ▪ HP-E35GS<br />
The Epoxy System HP-E35GS is an unfilled, low-viscosity combination of resin and hardener with high adhesion<br />
to several surfaces.<br />
Features and Benefits:<br />
• Water barrier<br />
• Deep impregnation<br />
• Pore filling<br />
• Solidifies underground<br />
• High adhesion even on damp substrates<br />
• Substrate preparation in system setup with E30RB or E30VB<br />
Product Properties: Resin Hardener Method<br />
HP-E35GS<br />
Colouring<br />
Amber<br />
Mixing ratio<br />
weight 100 60<br />
+10% Thinner HP-XB<br />
Mixed viscosity<br />
low viscosity<br />
Pot life (100g at 20°C) minutes<br />
35<br />
Jellying time after approx. (at <strong>23</strong>°C) hours<br />
2 - 3<br />
Recoating after approx. (at 20°C) hours 8, maximal 24<br />
Processing temperature (minimal) °C<br />
10<br />
Processing temperature (optimal) °C<br />
18 - 25<br />
Consumption kg/m² approx. 100<br />
Epoxy Resin Systems<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
74<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com