Delivery Program_01_23_Englisch

Coating and Laminating Epoxy-System ▪ HP-E30TDS
The Epoxy-System HP-E30TDS is a filled and thixotropic two-component combination of resin and hardener with
medium working time (pot life). It is versatile for high quality surface coatings.
Features and Benefits:
• sealing for wood, metal, several plastics (especially frp), screed and concrete
• very good adhesive properties, high abrasion-reasistance
• very high chemical and mechanical resistance
• distinct osmosis protection
• free of solvents, can be thinned with HP-XB if demanded (maximum up to 5%)
• Used as high quality surface coating in following areas:
- boatbuilding (especially for osmosis protection underwater)
- outdoor and indoor swimming pools, water tanks, fish and aquaculture ponds
- roofs and rooftops
- balcony sealing
- agricultural and industrial coantings
- as surface for low temperature moulds (< 50°C)
Available in several colours.
By adding the colour paste HP-FP (page 165) it is colour-adjustable!
In order to achieve best results we recommend the use in combination with our primer / sealer (HP-E80FS) and
/ or laminating resin (HP-E30TLS).
Product Properties: Resin Hardener Method
Mixing ratio
Mixed viscosity
(at 20°C)
weight
Pot life (at 20°C) minutes
Walkable after (at 20°C) hours
Walkable after (at 15°C) hours
Processing temperature (optimum) °C
Processing temperature (minimum) °C
Technical
Data Sheet
HP-E30TDS
100 53
30
24
48
20 - 25
15
Online Shop
Epoxy Resin Systems
** The epoxi system HP-E30TDS has a low yellowing potential. Under UV, chlorine and weather conditions (such as increased outside temperatures)
are epoxy resins generally not completely color-stable over the long term. **
** To increase the color stability, we recommend using an additional transparent topcoat HP-E30TDS-0000 incl. Approx. 3% UV stabilizer
HP-BEL91. These products can be ordered optionally.**
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 69