Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FEATURES<br />
CHEMICAL<br />
RESISTANCE<br />
VISCOSITY POT LIFE TEMPERATURES<br />
the higher,<br />
the thicker<br />
min. at<br />
20°C<br />
… processing<br />
minimum(recommended)<br />
… loadability<br />
(Tg MAX in °C)<br />
Priming of mineral / porous<br />
substrates, + XB thinner for deep<br />
impregnation.<br />
Water barrier layer<br />
high<br />
low<br />
35 10 (20°C) 150 - 250 g/m²<br />
Filler with fine fillers,<br />
grindable, semi-flexible<br />
high pasty 30 15 (20°C) as needed<br />
Floor and wall coating,<br />
brushable & rollable, high abrasion<br />
resistance, easy to clean<br />
very high<br />
viscous<br />
30 15 (20°C) 400 - 600 g/m²<br />
Floor and wall coating,<br />
self-levelling, high abrasion<br />
resistance, easy to clean<br />
very high<br />
viscous<br />
30 15 (20°C) 2 - ≥ 5 kg/m²<br />
Very good chemical resistance,<br />
protection against many acids /<br />
alkalis<br />
very high<br />
viscous<br />
30 15 (18 - 25°C) 250 - 400 g/m²<br />
Paving joint mortar<br />
Dry process high low<br />
Paving grout,<br />
Dry process high low<br />
25 5 (10 - 25°C)<br />
45 15 - 25 °C<br />
1,6kg to 25kg<br />
sand with approx.<br />
0.7 - 1.3mm grain<br />
size<br />
1,6kg to 25kg<br />
sand with approx.<br />
0.7 - 1.3mm grain<br />
size<br />
Paving grout,<br />
Mudding method<br />
high<br />
medium<br />
viscosity<br />
60 15 - 25 °C<br />
2kg to 25kg sand<br />
with approx. 0.7 -<br />
1.3mm grain size<br />
Rev. 21.<strong>01</strong><br />
1<br />
2<br />
3<br />
Epoxy Resin Systems<br />
System structure Article Consumption<br />
1 Primer E35GS ca. 150 - 250 g/m²<br />
2 Filler System E30S As needed<br />
3 Levelling Coating E30VB ca. 2 - ≥ 5 kg/m²<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 73
Change language