Delivery Program_01_23_Englisch

Mold and Casting Resins
Epoxy Mould Covering Resin ▪ HP-E30FB
The epoxy resin system HP-E30FB is an aluminium-filled, high-viscous combination of resin and hardener with
high abrasion resistance and processing time (pot life) of about 30 minutes.
Features and Benefits:
• High quality mould covering resin, aluminium-filled
• Non-drip, without run-off on vertical surfaces, high thixotropic
• Produced in vacuum therefore free of air bubbles
• Coloured in deep black
• For abrasion- and breaking resistance surfaces with good thermal conductivity
• User friendly mixing ratios (100:10) (If necessary dilutable with XB-thinner)
• Innovative formulation, free of DETA¹ with high styrene resistance*
• For following layers wet-in-wet. Another option is to work with a dry-coupling layer.
Product Properties: Resin Hardener
HP-E30FB
Colouring
deep black
Mixing ratio
weight 100 10
Mixed viscosity
(at 20°C)
Pot life (at 20°C) minutes
30
Demouldable after
hours
24
Processing temperature (optimum) °C
20 - 25
Processing temperature (minimum) °C
15- 25
Technical
Data Sheet
Online Shop
86
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com