Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Polyurethane flexibal Casting Resin ▪ HP-SI-VD<br />
SI-VD is added into the silicone system SI30GB to optimize the flow properties. The addition reduce the pot life<br />
of the SI30GB.<br />
Features and Benefits:<br />
• Excellent thickening effect for SI30GB<br />
• Solvent-free<br />
• Dilution of condensation and additioncuring RTV-s silicone systems<br />
• Optimization of the gradient properties<br />
• Creation of silicone putties<br />
• The additon reduce the pot life<br />
Mold and Casting Resins<br />
Physical data:<br />
Density 20°C: Ca. 1,1 g/cm³<br />
Viscosity: 100 - 300 mPas<br />
Gardner: < 2<br />
Dosage:<br />
Reduction of the flow rate: 0,1 % - 0,2 %<br />
Creation of putties: 0,5 % - 1,0 %<br />
PUR Fast Casting Resin ▪ HP-R15GB-flex<br />
The PUR system HP-R15GB-flex is an unfilled, medium-viscosity 2-component combination of resin and hardener<br />
with high flexibility.<br />
Features and Benefits:<br />
• Excellent flow characteristics<br />
• High flexibility<br />
• Paintable with colouring pastes<br />
• Creation of detailed models with low wall thicknesses<br />
Product Properties:<br />
HP-R15GB-flex<br />
Colouring<br />
Mixing ratio<br />
weight<br />
Mixed viscosity<br />
Pot life (at 20°C) minutes<br />
Demouldable after (at 20°C) minutes<br />
Full cure (at 20°C) hours (h)<br />
Hardness Shore A<br />
beige<br />
100/30<br />
medium viscous<br />
10 - 15<br />
5<br />
24<br />
60 - 70<br />
Technical<br />
Data Sheet<br />
Online Shop<br />
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 95
Change language