Delivery Program_01_23_Englisch
elivery programme of HP-Textiles GmbH HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
elivery programme of HP-Textiles GmbH
HP-Textiles is your system supplier for fibre composites. In addition to a wide range of fibre reinforcement materials, specially formulated epoxy resins and many vacuum and accessory components, innovative products round off our product portfolio.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mold and Casting Resins<br />
EP-Adhesive-/ Laminate System ▪ HP-E25KL / -45KL<br />
The Epoxy Laminating Resin Systems HP-E25KL and HP-E45KL are unfilled, medium-viscous, chemical resistant<br />
combination of resin and hardener with short or medium processing time (pot life).<br />
They can be used as general-purpose systems for many applications:<br />
as Laminating Resin:<br />
as Mould Resin:<br />
• Excellent wet-out of fibreglass, carbon and<br />
aramid fibres<br />
• Cold-hardening, medium-viscosity,<br />
HP-E25KL: used from 5°C<br />
• Usable as mould making resin<br />
(mixable with colour pigments)<br />
• For coupling-layers (with fillers)<br />
as Covering Layer Resin:<br />
• Clear, tack-free surface<br />
• Usable for repairs / refit of osmosis damages<br />
• High resistance to many chemicals<br />
such as styrene, fuels, ...<br />
• Therefore, they can be used for coatings in tanks,<br />
pipelines, ponds and terrariums<br />
as Adhesive Resin or basic for Fillers:<br />
• Due to a good adhesion for bonding / fillers<br />
can be added<br />
(e. g. combination of HP-PK22 and HP-BF1)<br />
The special formulation allows the usage under difficult conditions (low temperatures, air humidity).<br />
HP-E25KL / HP-E45KL are also free of nonylphenol and contain no reactive diluents!<br />
Please note:<br />
HP-E25KL and HP-E45KL come with a similar resin.<br />
Both hardeners can be mixed among themselves.<br />
Product Properties: Resin Hardener<br />
HP-E25KL HP-E45KL<br />
Colouring colourless light blue-green<br />
Mixing ratio<br />
weight 100 60<br />
Mixed viscosity (at 20°C) mPa s 2500 - 3500 (medium viscous)<br />
Mixed viscosity (at 25°C) mPa s 1400 - 1800 (medium viscous)<br />
Pot life (at 20°C) minutes<br />
25 45<br />
Demouldable after<br />
h<br />
Change language