Delivery Program_01_23_Englisch

Epoxy Filler ▪ HP-E30S
The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This
filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore
low unpleasant odour. Further more this epoxy filler is suitable for permanent immersion in (sea) water.
Features and Benefits:
• Very good adhesion to wood, steel, polyester and other surfaces
provided with suitable primers
• Water vapour impermeable
• Resistant to various chemicals
• Among others, usable for osmosis treatment
• Easy to sand
• Semi-flexible
• Suitable for permanent immersion in (sea) water
• Dust dry after approx. 120min
Product Properties: Resin Hardener Method
Colouring
Mixing ratio
Mixed viscosity
weight
Pot life (100g at 20°C) minutes
Dust dry after (at 20°C) hours
Recoating interval (at 20°C) hours
Processing temperature (minimal) °C
HP-E30S
Light green - mat
pasty
Density g/cm³ approx. 1,5 (mixed)
Solid Content % approx. 100
Flash Point (DIN 53213 °C
100 50
Technical
Data Sheet
30
2
48
15
> 100
Online Shop
Epoxy Resin Systems
phone: +49 (0) 5905-9459870 www.hp-textiles.com mail: info@hp-textiles.com 75