Catalog_Sprinkler attachment_EN_2023

MÜPRO
Products for the attachment of sprinkler systems
Minimum requirements for supports in compliance with VdS-Guideline 2092/CEA 4001
Nominal-Ø
[mm]
Minimum load-bearing
capacity at 20 °C
[kg]
Minimum cross-section area
[mm 2 ]
Thread
DN ≤ 50 200 30 M8
50 < DN ≤ 100 350 50 M10
100 < DN ≤ 150 500 70 M12
150 < DN ≤ 200 850 125 M16
Pipe clamps
Product Size Type Guideline Page
Single bossed clamps, without lining
Single bossed clamps, heavy-duty version,
without lining
Single bossed clamps, heavy-duty version,
with DÄMMGULAST ® red
Pipe loops type EHS
for pipe outer diameter
from ⅜" to 2", M8
from 70 mm to 4", M10
from 122 mm to 6", M12
from 223 mm, M16
for pipe outer diameter
from ⅜" to 2", M8
from 70 mm to 4", M10
from 125 mm to 6", M12
from 180 mm to 8", M16
from 248 mm to 12", M20
for pipe outer diameter
from ⅜" to 2", M8
from 70 mm to 4", M10
from 125 mm to 6", M12
for pipe outer diameter
from 1" to 2", M8
from 1" to 4", M10
from 5" to 6", M12
from 8", M16
from 10", M20
galvanised VdS 2100 1/1
1/2-1/4
1/5
1/7
Wall hanger brackets and angle brackets
Product Size Type Guideline Page
MPR-Wall hanger brackets 41/41/2.5, 41/62/2.5 galvanised VdS 2100 2/11-2/12
Cantilever brackets
100 x 100 x 4 mm
200 x 200 x 4 mm
200 x 200 x 6 mm
CEA 4001 2/43
Angle brackets, heavy-duty version
size 1, length 315 mm
size 2, length 550 mm
size 3, length 750 mm
size 4, length 900 mm
hot-dip
galvanised
2/44
07/2023
© - progress and quality
VII