Catalog_Sprinkler attachment_EN_2023
Sprinkler attachment
Sprinkler attachment
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TECHNICAL INFORMATION<br />
Fasteners with VdS approval<br />
Overview of approved fasteners for sprinkler systems<br />
Approved<br />
connecting thread<br />
For nominal diameter<br />
[DN]<br />
Pipe diameter<br />
[DN]<br />
M8 – up to 50<br />
M10 > 50 up to 100<br />
M12 > 100 up to 150<br />
M16 > 150<br />
!<br />
All MÜPRO components approved by VdS (corresponding approval reports are available) can be combined into the<br />
various arrangements shown above.<br />
Reference to the VdS approval can be found on the respective catalogue pages.<br />
A B C D E F<br />
Trapezoidal sheet<br />
hanger with<br />
welded-on nut and<br />
threaded rod M8<br />
for up to DN 50<br />
Trapezoidal sheet<br />
hanger with<br />
clearance hole and<br />
threaded rod M8 or M10<br />
for up to DN 50<br />
Through anchor<br />
M8, M10<br />
Heavy duty anchor BZ<br />
M8, M10, M12<br />
or M16<br />
Gas concrete under cut<br />
anchor<br />
porous concrete plug<br />
type M8, M10<br />
Girder cleat M8 +<br />
MPR-Support channel<br />
41/2.0 +<br />
MPR-Hammer head<br />
fastener M8, M10, M12<br />
or<br />
MPR-Quick fastener<br />
type S+ M8, M10, M12<br />
Girder cleat M10 +<br />
MPR-Support channel<br />
41/2.0 and 41/2.5 +<br />
MPR-Hammer head<br />
fastener M10, M12, M16<br />
or<br />
MPR-Quick fastener<br />
type S+ M10, M12, M16<br />
Girder clamp with<br />
M8 or M10 internal<br />
thread (for DN 65<br />
and larger with<br />
securing lug) +<br />
threaded rod M8<br />
or M10<br />
Girder clamp with clearance<br />
hole for<br />
M8, M10 or M12<br />
(for DN 65 and larger<br />
with securing lug) +<br />
threaded rod M8,<br />
M10 or M12<br />
Girder clamp with<br />
joint M8 or M10<br />
+ threaded rod M8<br />
or M10<br />
(when fastening pipes<br />
bigger than DN 65,<br />
a safety steel strip must<br />
be used)<br />
MPR-Wall hanger<br />
bracket 41/41/2.5<br />
or 41/62/2.5 +<br />
threaded rod<br />
M8, M10 or M12 +<br />
MPR-Clamp bracket<br />
M8, M10 or M12<br />
Pipe loop type EHS DN 25–DN 250<br />
or single bossed clamp DN 10 –DN 300<br />
07/<strong>2023</strong><br />
8/14 © Müpro - progress and quality
Change language