Catalog_Sprinkler attachment_EN_2023

NAMEPLATES
ML-Strap clamps
Application
• For attachment of all kinds of signs,
e.g. traffic signs, street name signs,
signals, posters, timetable display
cases etc.
Your advantages
• Suitable for posts of any shape and
size
• Simple, quick and rigid mounting
• Weatherproof
• Can be dismantled at any time and
re-used
• High breaking strength up to 1.0 kN
Installation with ML-Strap clamps
ML-Strap clamps include a hot-dip galvanised
clamping body with a clamping
screw set as well as a mounting strap
in galvanised or stainless steel version.
Lay steel strap around the unslotted
screw. The length of the shorter end
must be roughly equal to a third of the
pipe circunference, however 100 mm,
at least. Cut long end of the strap to
size and cut end to a point. The
mounting length depends on the
circunference of the mast.
Insert the pointed end of the strap into
the slotted screw, then turn the head
anti-clockwise. The steel strap wraps
around the clamping screw and the
strap clamp is tightened.
Strap band must be wrapped around
the clamping screw at least 3 times. To
prevent loosening, tighten the nut firmly.
07/2023
6/10 © - progress and quality