Catalog_Sprinkler attachment_EN_2023

TECHNICAL INFORMATION
Pipelines
pipe weights and distances between supports
Maximum recommended fastening distances for pipelines with single bossed clamps and DÄMMGULAST®
vibration control lining
Copper piping
DIN EN 1057 and DIN EN 12449/12451
DN
[NW]
Outer Ø
[mm]
Empty
[kg/m]
Pipe weights
Water-filled
[kg/m]
Water-filled +
insulated
[kg/m]
10 10 0.25 0.30 0.4 0.6
Maximum
spacing
[m]
12 12 0.30 0.39 0.5 1.0
15 15 0.39 0.52 0.8 1.1
18 18 0.47 0.68 1.0 1.3
22 22 0.58 0.90 1.3 1.3
28 28 1.10 1.59 2.4 1.5
35 35 1.39 2.20 3.1 1.6
42 42 1.68 2.88 4.4 1.7
54 54 2.88 4.84 7.3 2.0
64 64 3.43 6.26 9.8 2.0
70 70 3.76 7.19 12.9 2.0
76 76 3.98 7.83 13.5 2.0
80 80 4.31 8.85 14.7 2.0
104 104 5.64 13.50 25.5 2.5
125 125 10.12 21.25 33.5 2.5
131 131 10.62 22.89 35.0 2.5
Cast iron (SML) drainage pipes with graphite in lamella
form
DN
[NW]
Outer Ø
[mm]
Empty
[kg/m]
Pipe weights
Water-filled
[kg/m]
Maximum
spacing
[m]
50 58 4.3 6.4 1.5–2.0
70 78 5.9 9.9
80 83 6.1 10.6
100 110 8.4 16.7
125 135 11.8 24.5
150 160 14.1 32.2
200 210 23.1 54.5
250 274 33.3 87.6
300 326 43.2 120.6
Manufacturer
specifications state that
each pipe section must be
supported at least twice.
DN
[NW]
Drain pipes GA DIN 19500 Pipe weights Maximum
spacing
[m]
Outer Ø
[mm]
Empty
[kg/m]
Water-filled
[kg/m]
50 60 5.30 7.51 0.6
70 80 7.10 11.29 0.8
100 112 10.30 18.80 1.2
125 137 13.70 26.77 1.4
150 162 17.30 35.45 1.6
200 212 32.70 64.12 2.0
!
Any relevant information from the pipe manufacturer is to be taken into account.
07/2023
8/2 © Müpro - progress and quality