Catalog_Sprinkler attachment_EN_2023

TECHNICAL INFORMATION
Pipelines
distances between supports
Maximum recommended fastening distances for pipelines according to DIN EN 806 part 4
Carbon steel system pipe
GEBERIT Mapress
DIN EN 10305
Spacings acc. to
manufacturer
[m]
DN
[NW]
Nominal dimension d x s
[mm]
Befestigung
horizontal
Empfehlung
GEBERIT
10 12 x 1.2 1.00 1.50
12 15 x 1.2 1.20 1.50
15 18 x 1.2 1.20 1.50
20 22 x 1.2 1.80 2.50
25 28 x 1.5 1.80 2.50
32 35 x 1.5 2.40 3.50
40 42 x 1.5 2.40 3.50
50 54 x 1.5 2.70 3.50
65 76.1 x 2.0 3.00 5.00
80 88.9 x 2.0 3.00 5.00
100 108 x 2.0 3.00 5.00
Maximum recommended fastening distances for pipelines according to VdS CEA 4001 for sprinkler systems
DN
[NW]
Carbon steel system pipe
GEBERIT Mapress
1.0215 galvanised inside and outside
Nominal dimension d x s
[mm]
Spacings acc. to
manufacturer
[m]
20 22 x 1.5 2.00
25 28 x 1.5 2.00
32 35 x 1.5 2.00
40 42 x 1.5 2.00
50 54 x 1.5 2.00
65 76.1 x 2.0 2.00
80 88.9 x 2.0 2.00
100 108 x 2.0 2.00
!
Any relevant information from the pipe manufacturer is to be taken into account.
07/2023
© Müpro - progress and quality
8/5