Engineering System - Siemens Automation and Drives Group

10
Automation systems
Fault-tolerant automation systems
■ Selection and Ordering Data Order No.
Individual components of fault-tolerant automation systems
CPU 414-4H
Main memory 768 Kbyte
module occupies 2 slots
6ES7 414-4HJ00-0AB0
CPU 417-4H
Main memory 4,000 Kbyte
module occupies 2 slots
6ES7 417-4HL01-0AB0
Sync Module
For linking the two CPUs 414-4H
or 417-4H;
two modules required per CPU
6ES7 960-1AA00-0XA0 B)
Sync Cable (fiberoptic cable)
For connecting the two
CPUs 414-4H or 417-4H;
each redundant automation systems
requires 2 cables
1 m 6ES7 960-1AA00-5AA0
2 m 6ES7 960-1AA00-5BA0
10 m 6ES7 960-1AA00-5KA0
Other lengths On request
RAM Expansion for CPU 417-4H
Main Memory RAM
(only for CPU 417-x; 2 can be
plugged in each)
4 (2 x 2) Mbyte 6ES7 955-2AL00-0AA0
8 (2 x 4) Mbyte 6ES7 955-2AM00-0AA0
Memory Card RAM
1 Mbyte 6ES7 952-1AK00-0AA0
2 Mbyte 6ES7 952-1AL00-0AA0
4 Mbyte 6ES7 952-1AM00-0AA0
8 Mbyte 6ES7 952-1AP00-0AA0
16 Mbyte 6ES7 952-1AS00-0AA0 B)
Memory Card Flash-EPROM
Only required to update firmware
4 Mbyte 6ES7 952-1KM00-0AA0
CP 443-1
6GK7 443-1EX11-0XE0
Communications module for connection
of SIMATIC S7-400 to
Industrial Ethernet through TCP/IP
and ISO; for S7 communication,
S5-compatible communication
(SEND/RECEIVE) with
FETCH/WRITE with or without
RFC 1006, 10/100 Mbit/s,
with AUI/ITP and RJ45 connections,
electronic manual on CD;
module occupies 1 slot
CP 443-5 Extended
6GK7 443-5DX03-0XE0
Communications module for connection
of SIMATIC S7-400 to
PROFIBUS as DP master or for S7
communication, for increasing the
number of DP lines, for data set
routing with SIMATIC PDM and for
10-ms time stamp,
electronic manual on CD;
module occupies 1 slot
10/8
Siemens ST PCS 7 · October 2004
■ Selection and Ordering Data Order No.
PS 407 power supply module 6ES7 407-0KR00-0AA0
for redundant use; 10 A
120/230 V AC; 5 V DC/10 A,
24 V DC/1 A; with battery compartment
for 2 backup batteries,
module occupies 2 slots
PS 405 power supply module; 6ES7 405-0KA01-0AA0
10 A
24 V DC; 5 V DC/10 A,
24 V DC/1 A; with battery compartment
for 2 backup batteries,
module occupies 2 slots
Backup Battery
6ES7 971-0BA00
Type AA, 1.9 Ah
UR1 Subrack
6ES7 400-1TA01-0AA0
18 slots
UR2 Subrack
6ES7 400-1JA01-0AA0
9 slots
UR2-H Subrack
6ES7 400-2JA00-0AA0
For divided central controllers;
2 x 9 slots
Runtime licenses for libraries
PCS 7 Library Blocks V6.0 6ES7 653-2BG06-2YB0
runtime license
valid for one SIMATIC PCS 7 automation
system
trilingual (German, English,
French)
Type of delivery: Certificate of
license
Engineering
(see the section "Engineering system")
In the case of engineering systems with standard engineering software
SIMATIC PCS 7 V6.0 up to ServicePack 2 you must install the S7-400H
option package in order to be able to configure automation systems with
H architecture (H/F/FH systems). With Service Pack 3 and higher, the
functionality of the S7-400H option package is already integrated in the
standard engineering software.
S7-400H V5.2 Option Package 6ES7 833-2AC01-0YB0
For STEP 7 and SIMATIC PCS 7
Only for engineering systems with
standard engineering software
SIMATIC PCS 7 V6.0 up to Service
Pack 2
Type of delivery:
Certificate of license and authorization
diskette
Y-link
Y-link
6ES7 197-1LA02-0XA0
For connection of devices with
only one PROFIBUS DP interface
to a fault-tolerant automation system
B) Subject to export regulations: AL: N, ECCN: EAR99H
■ Options
Y-link
Bus coupler for transition from a redundant PROFIBUS DP
master system to a single-channel PROFIBUS DP master system
For connecting devices with only one PROFIBUS DP interface
to the redundant PROFIBUS DP master system AS 414H/
AS 417H
Detailed information on Y-link can be found at "Communication /
PROFIBUS DP“