Engineering System - Siemens Automation and Drives Group

SIMATIC PCS 7 BOX supports not only the distributed I/O devices
of the ET 200 range with an extensive selection of cost-effective
signal and function modules but also the connection of
intelligent field/process devices on PROFIBUS PA. The process
I/Os are connected through the two PROFIBUS DP ports of the
slot CPU. As SIMATIC PDM can only access field devices on the
PROFIBUS DP through the onboard communications processor
CP 5611, an additional cross connection between the DP port
and CP 5611 is required to use SIMATIC PDM . A plug required
for this purpose is supplied with the SIMATIC PCS 7 BOX.
Configuration modifications during operation (CiR) are not yet
supported by the current CPU WinAC Slot 416. However, plans
to include this functionality in future WinAC Slot CPUs are currently
in the pipeline.
In a plant network with other SIMATIC PCS 7 system components
such as AS, OS, ES or BATCH and MES applications, bus
communication is implemented through the Ethernet interface
integrated in the SIMATIC PCS 7 BOX. An additional CP 1512 is
required (see "Accessories") for connecting to the SIMATIC
PCS 7 terminal bus (OS-LAN).
SIMATIC PCS 7 BOX is available in the form of two product bundles:
as a preinstalled SIMATIC PCS 7 complete system with AS, ES
and OS functionality for up to 250 process objects (POs) / 8 K
OS variables
as a preinstalled SIMATIC PCS 7 runtime system with AS and
OS functionality for up to 250 process objects (POs) / 8 K OS
variables
These can be further expanded using the following add-on/expansion
components (see also Chapter "ES/OS/Batch/IT basic
devices" and the catalog "PC-based Automation"):
SIMATIC PCS 7 Power Packs for up to 2,000 POs / 64 K OS
variables
SIMATIC PDM Package for PCS 7
CP 1512 for connecting to the OS-LAN (SIMATIC PCS 7 terminal
bus) of a SIMATIC PCS 7 plant network
TK 200 standard keyboard
Display and CRT monitors for office and industrial environments
SITOP power supply 230 V AC / 24 V DC
SITOP power DC-UPS module 15 A with RS 232 interface
DC-UPS software for the further processing of signals sent
from the DC-UPS module using the RS 232 interface on the PC
(state visualization and the definition of reactions to different
operating states of the DC-UPS module), can be used with
Windows NT, 2000 and XP; freeware for downloading at
http://www.siemens.com/sitop
SITOP power battery module 24 V DC /20 A/7 Ah for DC-UPS
module 15 A
■ Technical specifications
SIMATIC PCS 7 BOX
SIMATIC PCS 7 BOX
Industrial PC: SIMATIC Box PC 620
CPU Intel Pentium III 1.26 GHz
Main memory 1 Gbyte
Second Level Cache 512 Kbyte
Hard disk memory 80 Gbyte
Diskette drive 1.44 Mbyte
DVD-ROM/CD-RW Combo drive 8/8/24x
Graphics UXGA LCD controller on AGP
bus, 1280 x 1024 at 85 Hz
Ethernet integrated Ethernet interface
10/100 Mbit/s (RJ45)
PROFIBUS DP 12 Mbit/s (floating, CP 5611-compatible)
USB 2 terminals (high current)
Expansions 1 CardBus slot for PCMCIA Typ III
PC card
Power supply 24 V DC
Operating system Microsoft Windows 2000 Professional
Automation: slot PLC module
CPU WinAC Slot 416 V3.4
Main memory 1.6 + 1.6 Mbyte (integrated)
Loading memory 256 Kbyte
Memory card 2 Mbyte RAM (installed)
Processing times Binary command: 0.08 µs,
IEEE floating point: 0.48 µs
PROFIBUS DP PROFIBUS DP and
PROFIBUS DP/MPI interface
onboard
Connectable distributed I/Os ET 200M, ET 200iS, ET 200S,
PROFIBUS DP standard slaves,
PROFIBUS PA devices (using
DP/PA link or DP-PA coupler)
Dimensions PCI plug-in card (3/4 long)
Power supply Power supply extension board
independent of PC;
external power supply 24 V DC
and battery buffer
Operation and visualization
Software PCS 7 OS Software Single Station
V6.0 (preinstalled)
Licenses 250 POs/RT 8K variables
(extendable to 2000 POs/RT 64K
per PowerPack)
Engineering
Software PCS 7 Engineering Software V6.0
(preinstalled)
Licenses AS/OS for 250 POs/RC 8K
(extendable to 2000 POs/RC 64K
per Power Pack)
Siemens ST PCS 7 · October 2004
3/3
3