Engineering System - Siemens Automation and Drives Group

11
Process I/O
ET 200M distributed I/O
Power supply
■ Overview
■ Selection and Ordering Data Order No.
The PS 307 or PS 305 load power supply is used to supply power PS 307 Load Power Supply
to the ET 200M. There is a choice of input voltages and output Including connection assembly;
currents (AC 120/230 V with 2 A, 5 A or 10 A, or DC 24...110 V
with 2 A) to suit the field of application.
120/230 V AC; 24 V DC
- 2 A; 50 mm wide 6ES7 307-1BA00-0AA0
- 5 A; 80 mm wide 6ES7 307-1EA00-0AA0
- 5 A, extended temperature
range; 80 mm wide
6ES7 307-1EA80-0AA0
- 10A, 200mm wide
PS 305 Load Power Supply
Including connection assembly;
24/48/60/110 V DC; 24 V DC
6ES7 307-1KA01-0AA0
- 2 A, extended temperature
range; 80 mm wide
6ES7 305-1BA80-0AA0
Interface module
■ Overview
■ Selection and Ordering Data Order No.
An IM 153-2 High Feature interface module is needed to connect IM 153-2 High Feature
6ES7 153-2BA00-0XB0 B)
the ET 200M to the PROFIBUS DP field bus. It supports the fol- Slave interface module for conlowing
functions:
nection of an ET 200M to
7 HART configuring of intelligent field devices,
PROFIBUS DP, with time stamp
(accuracy 5 ms), support of
7 configuration of ET 200M I/Os in RUN mode of the automation HART functionality, F modules,
system,
7 connection to redundant AS 414H / AS 417H automation systems,
7 use of ET 200M function modules (controller and counter modules).
FM modules, "Configuration in
RUN" function; also for use in
redundant systems
IM 153-2 FO High Feature
Slave interface module for connection
of an ET 200M to optical
6ES7 153-2BB00-0XB0 B)
This interface module is also available in a fiberoptic (FO) version
for connecting to an optical PROFIBUS.
PROFIBUS DP; support of HART
functionality, F modules, FM modules,
"Configuration in RUN" function;
also for use in redundant
systems
Notes:
Plastic fiberoptic cables and a mounting set for simplex connectors
are required for use of the IM 153-2 FO (see "Plastic fiberoptic
cables“ in the section "Communication/PROFI-
BUS“)
The active bus modules and the profile rail for hot swapping are
required in order to be able to use the hot swapping function.
B) Subject to export regulations: AL: N, ECCN: EAR99H
11/6
Siemens ST PCS 7 · October 2004