Installation and Operating Instruction
Installation and Operating Instruction
Installation and Operating Instruction
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mounting / <strong>Installation</strong><br />
4.2.5 General <strong>Instruction</strong>s for the Gas Connection<br />
• The gas connection must be connected in accordance with the current<br />
regulations. <strong>Installation</strong> may only be performed by a licensed professional!<br />
• Make sure there is no open fire, flammable materials or the like in close<br />
proximity to the installation location. LIFE THREATENING DANGER!<br />
• Before installation, check to make sure the gas meter has adequate<br />
capacity. Take the usage of all household appliances into account.<br />
Let your energy provider know if your line does not have a high<br />
enough capacity.<br />
• Make sure the gas lines are clean. Clean the gas lines with high pressure<br />
or by knocking them clean before installation.<br />
• An approved shut-off valve with a fire protective faucet must be installed<br />
in front of the boiler.<br />
• Preferably, you can also install a gas filter to keep the gas control<br />
valve from getting dirty.<br />
4.2.6 Connecting the Gas Main<br />
Please follow these instructions during installation:<br />
• The main gas spigot must be shut off before the work begins. If the<br />
connection is older, make sure the spigot still closes to avoid uncontrolled<br />
gas leaking out.<br />
• Secure the line against accidental start up while you are working on<br />
the lines.<br />
• Make sure the fire protective faucet is mounted properly.<br />
• Before start up, make sure the entire gas line is sealed, especially at<br />
connection points. The gas faucet <strong>and</strong> the gas line may not exceed a<br />
maximum pressure of 150 mbar.<br />
• Ventilate the gas line after attaching to avoid malfunctions!<br />
• Ventilate the room well after installation to disperse any gas that may<br />
have escaped.<br />
- 17 -<br />
Gebr. Bruns GmbH is not responsible for typographical errors or technical inaccuracies <strong>and</strong> reserves the right to make adjustments.<br />
Gebr. Bruns GmbH • Hauptstraße 200 • 26683 Saterl<strong>and</strong> •Tel.: + 49 (0) 44 92 / 92 46-0 • Fax: + 49 (0) 44 92 / 71 41<br />
www.bruns-heiztechnik.de • info@bruns-heiztechnik.de
Change language