Installation and Operating Instruction
Installation and Operating Instruction
Installation and Operating Instruction
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mounting / <strong>Installation</strong><br />
Fig. 20 Insert the Emission Pipe into the Duct<br />
Mount the emission pipe between the unit<br />
<strong>and</strong> the support bar. The emission line to<br />
the unit must be placed at a slight downward<br />
slope, so condensation can flow<br />
back unhindered.<br />
Insert the pipe into the duct with a rope<br />
from above. The rope should stay taught<br />
at all times. Spacers should be placed<br />
every two meters after the collars.<br />
Place the support arc into the support<br />
bar.<br />
Fig. 21 Emission Connection - BOY III<br />
Follow the installation instructions for the respective emissions system!<br />
- 20 -<br />
Gebr. Bruns GmbH is not responsible for typographical errors or technical inaccuracies <strong>and</strong> reserves the right to make adjustments.<br />
Gebr. Bruns GmbH • Hauptstraße 200 • 26683 Saterl<strong>and</strong> •Tel.: + 49 (0) 44 92 / 92 46-0 • Fax: + 49 (0) 44 92 / 71 41<br />
www.bruns-heiztechnik.de • info@bruns-heiztechnik.de
Change language