Installation and Operating Instruction
Installation and Operating Instruction
Installation and Operating Instruction
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Maintenance<br />
Remove the control unit by pulling to the<br />
right.<br />
Carefully remove the burner. Carefully<br />
clean the heat exchange surfaces in the<br />
combustion chamber as well as the burner<br />
head with a nylon brush. Do not use a<br />
wire brush, sharp objects <strong>and</strong> so on!<br />
Remove the burner screws.<br />
nstall the components in reverse order. Make sure that all connections are screwed<br />
tight <strong>and</strong> well connected. Check to make sure the gas valve connection is airtight.<br />
The washer may need to be replaced.<br />
After successful maintenance, restart the unit. Make sure the unit is running<br />
free of errors after maintenance.<br />
- 42 -<br />
Gebr. Bruns GmbH is not responsible for typographical errors or technical inaccuracies <strong>and</strong> reserves the right to make adjustments.<br />
Gebr. Bruns GmbH • Hauptstraße 200 • 26683 Saterl<strong>and</strong> •Tel.: + 49 (0) 44 92 / 92 46-0 • Fax: + 49 (0) 44 92 / 71 41<br />
www.bruns-heiztechnik.de • info@bruns-heiztechnik.de
Change language