A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.1. *CONTOUR: DRAWING CONTOUR PLOTS 21<br />
3.1.7 *DRAW CZM: Drawing the cohesive zone in the contour plot<br />
command *DRAW CZM, suboption of *CONTOUR, draws the currently active cohesive zone<br />
in the contour plot. This option is specified for the crack growth simulation using the cohesive<br />
zone model.<br />
The following parameter is required:<br />
ELSET Set this parameter equal to the name of the interface element<br />
set which is used for the crack growth simulation.<br />
The following parameter is optional:<br />
COLOR Set this parameter equal to the color identifier which is used<br />
to draw the cohesive zone, see section 2.4 for definition of<br />
the color identifiers. By default, the color is defined by the<br />
program.<br />
Examples:<br />
1.The following entry is used to draw the current cohesive zone.<br />
*DRAW CZM, ELSET=CZMELE, COLOR=4