A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.11. *PLOT MESH: DRAWING THE FE MESH 53<br />
3.11 *PLOT MESH: Drawing the FE mesh<br />
The *PLOT MESH command is used to draw the finite element mesh. In the current version,<br />
this option is only available for drawing 2D meshes.<br />
The following parameter is required:<br />
OUTPUT Set this parameter equal to MPL for generating the neutral<br />
plot file<br />
The following options may be needed if one wants to draw the different element sets in different<br />
colors.<br />
*ELSET<br />
Format Entry<br />
The following data line is needed if *ELSET option is required:<br />
A The element set names to be drawn, the different element<br />
sets are separated by comma (,) or blanks.<br />
The following option and data lines are need if one wants to draw the different element sets in<br />
different colors.<br />
*COLOR TABLE<br />
Format Entry<br />
The following data line is need if *COLOR TABLE option is required:<br />
(n+1)I n, color 1, color 2, . . . , color n.<br />
Examples:<br />
1. Use the following entry to draw the FE mesh ofthe whole model.