A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS

3.3. *DEFORM: DRAWING THE DEFORMED MESH 25
3.3.1 *DETAIL: Creating a part of the model
*DETAIL, suboption of *DEFORM, is used to specify a part of the model to be plotted. The
*DETAIL specification only affects the current deformed plot. By default the entire model is
plotted.
The following parameter is optional:
ELSET Set this parameter equal to a element set name defining the elements to
be included in the detail.
Format Entry
The following data line is needed if ELSET parameter is omitted.
6F X1, Y1, Z1, X2, Y2, Z2. Here, (X1, Y1, Z1) define the
coordinates of minimum model space bounds of the part
of the model to be plotted, and (X2, Y2, Z2) define the
coordinates of maximum model space bounds of the part of
the model to be plotted.
Examples:
1. Use the following entry to creat a part of the model defined ny element set E0000001.
*DETAIL, ELSET=E0000001
2. Use the following entries to define a part of the model bounded by (0.0, 0.0, 0.0) and (10.0,
10.0, 0.0).
*DETAIL
0.0, 0.0, 0.0, 10.0, 10.0, 0.0