A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.9. *PARAMETER: GENERATING A TABULAR LIST 41<br />
3.9.6 *Jn×× ××: Selecting the J-integral<br />
Command *Jn×× ××, suboption of *PARAMETER command, is used to select the J-integral<br />
at the given position and contour for a 3D fracture analysis and a given contour for 2D analysis.<br />
The first two characters ×× are used to define the position of the J-integral to be selected<br />
in a 3D analysis, and the second ×× are used to define the contour number of the J-integral to<br />
be selected at that position.<br />
For the 2D analysis the command is *Jn××, or *Jn01 ××, and ×× indicates the contour<br />
number of J-integral to be selected.<br />
Examples:<br />
1. Use the following entries to select the J-integral in a 3D analysis.<br />
*Jn01 10<br />
*Jn05 10<br />
1. Use the following entry to select the contour 10 J-integral in a 2D analysis.<br />
*Jn10