A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
52 CHAPTER 3. COMMAND DESCRIPTION<br />
3.10.4 *HISTORY: Selecting time increments<br />
Command *HISTORY, suboption of *PATH, is used to specify a time step to be plotted. By<br />
default, all the time increment recorded are plotted.<br />
Format Entry<br />
The following data lines are needed if *HISTORY command is used:<br />
A, 2I ”STEP” K, INC. String ”STEP” is case sensitive, K is the step number,<br />
INC is the increment number. IF INC=0, all the increments in the step<br />
K recorded are included. IF K=0, all the steps recorded are selected.<br />
Repeat the above line as often as needed to give the more time increments.<br />
Examples:<br />
1. Use the following entries to select the corresponding time increments.<br />
*HISTORY<br />
STEP 1, 5<br />
STEP 2, 50<br />
STEP 3, 100
Change language