A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.9. *PARAMETER: GENERATING A TABULAR LIST 37<br />
3.9.3 *SIGav: Calculating volume average stresses<br />
Command *SIGav, a suboption of *PARAMETER command, is used for calculating the volume<br />
average stresses over a given material volume.<br />
The following parameters are required:<br />
VARIABLE Set this parameter equal to the name of the variable (stress components)<br />
to be averaged. A list of available variables are S11, S22, S33, S12, S13,<br />
S23.<br />
NAME Set this parameter equal to the name of the calculated value.<br />
Examples:<br />
1. Use the following entries to calculate the average stresses of S11 and S22 over the entire<br />
model, the resulted values are named S11av and S22av.<br />
*SIGav,VARIABLE=S11,NAME=S11av<br />
*SIGav,VARIABLE=S22,NAME=S22av