A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.10. *PATH: CALCULATING THE RESULTS ALONG A GIVEN CURVE 51<br />
3.10.3 *NORMALIZE: Normalizing the coordinates<br />
*NORMALIZE is Suboption of *PATH command for normalizing the coordinates.<br />
The following parameters are required:<br />
TYPE Set TYPE=CONSTANT - the coordinates are normalized<br />
by a constant, TYPE=Jn×× - the coordinates are normalized<br />
by Jn××/σo,TYPE=Jav - the coordinates are normalized<br />
by average J Jav/σo, TYPE=Knii - the coordinates are<br />
normalized by (Kn××/σo) 2 , referring to the section 3.9.6 for<br />
the definition of Jn××.<br />
Format Entry<br />
If INPUT=CONSTANT the following data line is required:<br />
F Constant.<br />
Examples:<br />
1. Use the following entry to normalize the coordinates by Jn11/σo.<br />
*NORMALIZE, TYPE=Jn11<br />
2. Use the following entry to normalize the coordinates by a constant 100.0.<br />
*NORMALIZE, TYPE=CONSTANT<br />
100.0
Change language