A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
A Finite Element Program (FECGS): Post-Processor FEPOST - GKSS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.3. *DEFORM: DRAWING THE DEFORMED MESH 27<br />
3.3.3 *COLOR TABLE: Defining a color table<br />
Command *COLOR TABLE, a suboption of *DEFORM, is used to specify a color table. In<br />
particularly, if the model contains several mesh areas corresponding to different materials, one<br />
may wish to plot the different material regions based on a predefined color table.<br />
Format Entry<br />
The following data line is needed for *COLOR TABLE command:<br />
(n+1)I n, color 1, color 2, . . . , color n. n is number of colors, and color i is the<br />
color identifier defined in the section 2.4.<br />
Examples:<br />
1.The following entries are used to specify a color table of 6 colors with the color identifiers, 4,<br />
6, 8, 10, 12 and 15. The color identifiers have been defined in section 2.4.<br />
*COLOR TABLE<br />
6, 4, 6, 8, 10, 12, 15
Change language