DNS-320 User Manual - D-Link
DNS-320 User Manual - D-Link
DNS-320 User Manual - D-Link
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
D-<strong>Link</strong> ShareCenter Pulse <strong>User</strong> <strong>Manual</strong><br />
5. Connect an Ethernet cable to the available Ethernet port. This cable should<br />
connect the ShareCenter Pulse to your local network via a router or switch, or<br />
directly to a computer for configuration.<br />
6. Connect the power adapter to the power receptacle.<br />
Make sure to align the drive connector to the SATA connector on the bottom edge inside the drive bay of the ShareCenter Pulse. Gently push the drive in until it connects.<br />
When a drive is inserted properly, you will feel it “seat” into the connector. Some hard drives that are thin or oddly shaped may need to be guided carefully into position. If a<br />
drive is not properly seated, the light will not illuminate after powering on the device.<br />
Page 10
Change language