AirData 54 Plus S2 USB

More documents

Recommendations

Info

AirData 54 Plus S2 USB User Manual Click “Apply” button. The result is illustrated in the following picture. Description of “DLS Status”: As shown in the figure above, after configuring the DLS successfully, the MAC address of the connected device and the Timeout Value of setting will be shown in the “DLS Status”. In the “DLS Status” of the connected device, it shows the MAC address of the Airdata adapter and the Timeout Value of setting. Display the values of “DLS Status” to “Direct Link Setup” as follow: In “DLS Status”, select a direct link STA that you want to show its values in “Direct Link Setup”. 37
AirData 54 Plus S2 USB User Manual Double-Click and the result is shown in the figure below. Disconnect Direct Link Setup as shown below: Select a direct link STA. Click the “Tear Down” button. The result is shown in the figure below. 38
Page 1 and 2: AirData 54 Plus S2 USB 54 Mbps Wire
Page 3 and 4: AirData 54 Plus S2 USB User Manual
Page 37: AirData 54 Plus S2 USB User Manual

AirData 54 Plus S2 USB

Create successful ePaper yourself

Delete template?

Save as template?