Installer manual - nibe.com
Installer manual - nibe.com
Installer manual - nibe.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
14<br />
Cold and hot water<br />
Connecting cold and hot water<br />
The mixing valve must be installed if the factory setting<br />
is changed so that the temperature can exceed 60 °C. If<br />
the factory setting is changed, national regulations must<br />
be observed. The setting is made in menu 5.1.1 (page<br />
43).<br />
-EB15<br />
-FL2<br />
-CM1<br />
XL4<br />
XL3<br />
Heating medium side<br />
Connecting the climate system<br />
When connecting to a system with thermostats on all<br />
radiators/under�oor heating coils, a relief valve must be<br />
�tted, or athermostat must be removed to ensure su�cient<br />
�ow.<br />
-EB15<br />
-FL2<br />
-CM1<br />
Chapter 4 | Pipe connections<br />
XL1<br />
XL2<br />
Pool<br />
Connecting pool<br />
Charging of the pool is controlled by the pool sensor. In<br />
the case o� ow pool temperatures, the shuttle valve reverses<br />
direction and opens towards the pool exchanger.<br />
The POOL 500 accessory is required for this connection.<br />
-EB101<br />
-CL11-QN19<br />
-EB15<br />
-CL11<br />
-FL2<br />
-CM1<br />
XL39<br />
-AA5<br />
-EP5<br />
-GP9 -BT51 -HQ4<br />
Two or more climate systems<br />
When more than one climate system is to be heated, the<br />
following connection can be used.<br />
The ECS 40/ECS 41. accessory is required for this connection.<br />
-EB15<br />
-FL2<br />
-CM1<br />
-EP21<br />
-AA5<br />
XL1<br />
XL2<br />
-BT2 -GP20<br />
-QN11 -BT3<br />
NIBE VVM 500<br />
POOL