AZURA Pump P 2.1L user manual
AZURA Pump P 2.1L user manual
AZURA Pump P 2.1L user manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Legend<br />
1 Serial number<br />
2 Pin header<br />
3 LAN port<br />
4 Interface for the<br />
Technical Support<br />
5 Mains power connection<br />
and power<br />
switch<br />
6 Connector Control<br />
Unit<br />
14 Unpacking and Setup<br />
2. Setup the delivery so you are able to read the label. Using the<br />
utility knife, cut the adhesive tape. Open the delivery.<br />
3. Remove the foam insert. Take out the accessories kit and the<br />
<strong>manual</strong>.<br />
4. Open the accessories kit and take out all accessories. Check<br />
the scope of delivery. In case any parts are missing, contact<br />
the technical support.<br />
5. Grip the device at its side panels and lift it out of the packaging.<br />
Do not hold onto front cover or leak tray.<br />
6. Remove the foam inserts from the device.<br />
7. Check for damages caused during transportation. In case you<br />
notice any damage, contact the technical support.<br />
8. Set-up the device in its location.<br />
9. Remove the protective foil.<br />
Ports on the Rear Side<br />
All connectors are located on the rear side of the detector.<br />
1<br />
2<br />
Fig. 2 P <strong>2.1L</strong> rear view<br />
Fig. 3 Connector Control Unit<br />
3 4 5<br />
6