AZURA Pump P 2.1L user manual
AZURA Pump P 2.1L user manual
AZURA Pump P 2.1L user manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30 Initial Startup<br />
Mounting a VICI Valco valve drive<br />
Prerequisite Holding bracket is attached to the side panel.<br />
Tools Allen screwdriver for 9/64"<br />
Process Figure<br />
Procedure 1. Screw the adapter<br />
plate on the rear side<br />
of the holding<br />
bracket.<br />
2. Slide the valve drive<br />
1 and the adapter<br />
plate from the rear<br />
to the front through<br />
the hole of the holding<br />
bracket as far as<br />
possible.<br />
3. Fasten the valve with<br />
four screws 2 to the<br />
front side.<br />
Result Valve drive is mounted.<br />
1<br />
Abb. 30 Back side of valve at the<br />
holding bracket<br />
2<br />
Abb. 31 Front side of valve at the<br />
holding bracket