Manual de Usuario SC-HC4EP(es) - Panasonic

LOOP ANTGROUNDConnectionsPortable audio equipment (Cords and equipment not included)RQTX0257 ENGLISH44Portable audio playerNote75ΩFM ANT1LOOP EXTAM ANT2AUXPlug type:➡Ø3.5 mm stereo Start playback from theportable audio source.AC IN3Headphones (not included)Reduce the volume level andconnect the headphones.Plug type: Ø3.5 mm stereo.NoteMAIN UNIT• Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal (for example, by switchingoff the equalizer or reducing the volume) of the other equipment before connection. High levels of input signal will distort the sound.• For details, refer to the instruction manual of the other equipment.1 Connect the FM indoor antenna. 3 Connect the AC mains lead.275 ΩTape the antenna to a wall or column, in a position with the leastamount of interference.Connect the AM loop antenna.12 3BlackWhiteRedAM indoor antennaUse a Phillips-headscrewdriver, etc.Stand the antennaup on its base.Adhesive tapeFM indoor antennaClick!Keep the loose antenna cord away from other wires and cords.Do not screw too tightly. Otherwise, the screwdriver goes aroundin circle and cannot be fixed.NoteConnect the AC mains leadafter all other connectionsare complete.To household ACmains socketInsertion of connectorAppliance inletApprox. 6 mm• Avoid listening for prolongedperiods of time to preventhearing damage.• Excessive sound pressurefrom earphones andheadphones can causehearing loss.To save power when the unit is not to be used for a long time,unplug it from the household AC mains socket. You will need toreset some memory items after plugging in the unit.ConnectorEven when the connector is perfectly inserted, depending onthe type of inlet used, the front part of the connector may jutout as shown in the drawing. However there is no problemusing the unit.