AWU04 User Manual full version (CA) - Targus

5.9.5 Scan Option
Chapter 5 Managing Business Cards 5-
To use the Setting option page to configure the Scan options, open the Setting page as
described in the preceding section of this chapter.
The Settings Scan option page will open
in the default configuration as seen in the
preceding picture. You may define Card
Style, Language, Chinese Character options
and Scanning method from the Scan Settings
option menu. You may also select Auto
Detection from the Scan option window.
Once you have completed your Scan option
settings in the Scan option window, you
may close the window by clicking the Apply
to complete the process.
5.9.6 Revising the Results of Chinese Card Recognition
WorldCard software has optical character recognition (OCR) capabilities design to work
specifically with Chinese characters.
To optimize the settings for recognition
of a Chinese language card, from the Setting
window, under the Chinese character option
settings, you may select the Traditional Chinese
character set or the Simplified Chinese
character set from the Output character pull
down menu as shown in the right picture.
Under the Chinese character option section,
you may also highlight the selection
box for Recognize Hong Kong characters
if you are scanning cards from Hong Kong.
The character set for Hong Kong is slightly
different than the Traditional or Simplified
Chinese character sets. To highlight the
Hong Kong characters option, click on the
selection box. A check mark will appear in
the box.