6 - MV Agusta

OPERATION 44EN4.8. Checks to be performed before ridingWARNING: A motorcycle can be in goodrunning order and then become unexpectedlyunreliable if it was unused for ashort or long period of time. You mustcarry out the inspections described inthe table below before each ride. A fewmoments taken to carry out theseinspections will help you maintain yourmotorcycle in optimum working orderand avoid unsafe situations that couldlead to loss of control of the motorcycle,serious injuries or even death.BrakesCheck fluid level (§ 6.8).Check for fluid leakage.Pull lever and press pedal to check brake operation.Check pads for wear (§ 6.7.)Lubricate the lever joint, if necessary.Gear leverPress pedal to check gear operation.Lubricate the lever joint, if necessary.Engine start button / stop switchCheck operation (§ 3.4).Clutch leverCheck fluid level (§ 6.9).Check for fluid leakage.Pull lever and check that it moves smoothly and gradually.Lubricate the lever joint, if necessary.Throttle twist gripCheck that grip rotates smoothly and returns to closedposition when released.Steering systemVerify that the operation is smooth and uniform.Check for play and loosening.Steering damperCheck adjustment (§ 5.6).Lights, visual and acoustic signalsCheck operation.TiresCheck inflating pressure and wear (§ 6.10).SuspensionsVerify that the operation is smooth and uniform.Check adjustment (§ 5.7 and § 5.8).Frame fastenersCheck tightening of all screws and nuts.Tighten them, if necessary.- 97 -