notice de matage sparcraft

PRECAUTIONS BEFORE STEPPING THE MASTChecks and preparation of the turnbuckles6- unscrew the turnbuckles (pin removed) by turning thebody clockwise;- the turnbuckles are designed with right and left hand threads.Position the body with the right screw on the bottom (traditionalscrew direction);- Think ahead: with the mast stepped, nothing must stop theturnbuckles from being tightened quickly (shrouds and forestay)to keep the shape;- keep the turnbuckles clean. Lubricate if required with SparcraftRigging grease;- protect the turnbuckles (cloths and/or tape) to avoid knocks duringhandling.Final check- check each pin is in place;- tie the standing and running rigging to the mast (forestay slack);- check that the turnbuckles and pins are compatible with the deck fittingsand chain plate;- Mast fitted to the keel: measure the distance under the deck and comparewith the distance between the foot and deck stop.Protect any parts that jut out- It is recommended that all sensitive elements of yourrig be protected. A simple piece of rigging tape can beplaced on clevis and split pins. This will help preventunnecessary wear to sails. This mark can also be usedas an indicator during checks on all the fittings.- attach the foam protection to the front side of thespreaders to avoid contact with the furler when moving the mast.www.sparcraft.com / 9