Metodologie e strumenti dell'Ingegneria dei Requisiti ... - MobiLab

The minimum threshold applied effort value can be tuned
during integration test with ATC system
The BCU will release the brake cylinders and set 0 on
MVB the Stopping Brake status. The BCU will use the
wired or MVB stopping brake command to release the brakes.
The train will start to move
PASSAGGIO AI REQUISITI SOFTWARE DI ALTO E BASSO LIVELLO
Frase originaria: ATO release the Propulsion Cut Out (set High) and commands on MVB (dataset
707/708) Coasting and Propulsion Reset, the effort request is set to 0%.
ID: SHR_ATO_01
LINK a REQ_BRAKE_61
Nome: Traction release by ATO
Input:
Precondizioni: The train is departing
Descrizione: ATO shall release the Propulsion Cut Out and shall command Coasting and Propulsion
Reset. ATO shall set the effort request to 0%
Output: Coasting and Propulsion Reset
Postcondizioni: The effort request is set to 0%
Tipologia: Functional
ID: SLR_ATO_01
Link a SHR_ATO_01 (HLR)
Nome: Traction release by ATO
Input:
Precondizioni: The train is departing
Descrizione: ATO shall release the Propulsion Cut Out (set High) and shall command Coasting and
Propulsion Reset on MVB (dataset 707/708). ATO shall set the effort request to 0%
Output: Coasting and Propulsion Reset on MVB through dataset 707/708
Postcondizioni: The effort request is set to 0%
SHR_BCU_01
SLR_BCU_01
129