16.11.2015 Views

Samsung Multifunzione a colori MultiXpress X7500LX (A3) (50ppm) - User Manual_36.16 MB, pdf, ENGLISH

Samsung Multifunzione a colori MultiXpress X7500LX (A3) (50ppm) - User Manual_36.16 MB, pdf, ENGLISH

Samsung Multifunzione a colori MultiXpress X7500LX (A3) (50ppm) - User Manual_36.16 MB, pdf, ENGLISH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Network settings (configuring TCP/IP)<br />

DNS Configuration<br />

You can configure the DNS server.<br />

• Host Name: Enter the host name. You can enter up to 63 characters. Default<br />

name is “SEC[MAC address]”.<br />

• Domain Name: Enter the domain name. You can enter up to 128 characters.<br />

3<br />

TCP/IPv6<br />

You can set the IPv6 settings.<br />

Tap Settings > Network Settings > Ethernet > TCP/IPv6 from the home<br />

screen or Apps.<br />

• Primary DNS Server: Enter the address of the DNS server you want to use<br />

primarily.<br />

• Secondary DNS Server: Enter the address of the DNS server you want to<br />

use as an alternative.<br />

• Dynamic DNS Registration: If you want to use, check the checkbox(es) of<br />

dynamic DNS registration. If this option is checked, the machine registers its<br />

host name and domain name to configured DNS servers dynamically. Also,<br />

if this option is checked and DHCP is selected, DHCP FQDN options are<br />

automatically disabled.<br />

WINS (Windows Internet Name Service)<br />

You can configure the WINS server. WINS is used in the Windows operating<br />

system. Select this option.<br />

You can also use this feature from the SyncThru Web Service. Open the<br />

Web browser from your networked computer and type the IP address of<br />

your machine (see "Settings tab" on page 185).<br />

• Protocol: Tap to use IPv6 protocol in the system. Reboot the machine to<br />

apply the change.<br />

• IPv6 Address: Shows the IPv6 address types.<br />

- Link-local Address: This is an IPv6 address starting with a prefix value<br />

FE80. This address has local link scope and is automatically generated.<br />

- Stateless Address: This is an IPv6 address which is formed by router<br />

advertised prefix and interface identifier. On a interface like Ethernet,<br />

interface identifier is usually derived from the Mac address of the<br />

machine. The advertised prefix depends on the router configurations.<br />

Display IP address<br />

More than one address may be configured for the router advertisement, but<br />

only one will be displayed in the display screen.<br />

You can set the machine to display the IP address on the Notification Bar. If you<br />

select this option the IP address will show on the Notification Bar.<br />

3. Network Setup<br />

339

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!