G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Target module »U2-R-CPU«<br />
Installation<br />
Connecting the target computer<br />
RS232: Use the RS232-M/F-2 cable to connect the computer’s 9-pin serial computer<br />
interface to this interface (optional).<br />
IMPORTANT: For each central module you can connect only one Transmission<br />
interface of the target module.<br />
Trans.: Use a category 5e (or better) twisted pair cable to connect this interface to the<br />
Dynamic Port of the USB/RS232 Main Channel that is assigned to the target computer.<br />
USB K/M: Use the USB device cable to connect one of the computer’s USB ports to this<br />
port.<br />
Power In: Insert the connection cable of the power pack to this interface. Now connect<br />
the power cable to the power pack and a power outlet.<br />
Status displays<br />
The blinking Transmission LEDs show the following connection statuses:<br />
LED Status Meaning<br />
Yellow Off No connection to network.<br />
On A user module is accessing the target module.<br />
Green On A user module is accessing the target module.<br />
Blinking No communication with central module.<br />
Flashing Connection to central module established successfully.<br />
No user module is accessing.<br />
31 · G&D <strong>DVICenter</strong>
Change language