G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Back panel<br />
User module »DVI-CON«<br />
Section LED Status Meaning<br />
Status Trans. on The communication with the matrix switch could be established.<br />
off The communication with the matrix switch could not be established.<br />
System on The device is booting or carries out a firmware update.<br />
blinking<br />
The system is ready for operation.<br />
Console Video on Stable image signal at video input.<br />
off The incoming video signal could not be detected or it lacks the<br />
required quality to be processed by the system.<br />
K/M on A local keyboard was fo<strong>und</strong>.<br />
off No power at PS/2 interface or USB bus.<br />
blink- The CPU input (PS/2 or USB) is active and ready.<br />
ing No local keyboard was fo<strong>und</strong>.<br />
Transmission<br />
LED Out<br />
The Transmission interface at the back panel of the user module provides additional<br />
status LEDs, which have the following functions:<br />
LED Colour Status Meaning<br />
left yellow off No connection to network.<br />
blinking Network connection to an end device.<br />
right green on A user module is accessing the target module.<br />
blinking No communication with matrix switch.<br />
flashing Connection to matrix switch established.<br />
No user module is accessing.<br />
flickering Keyboard and mouse inputs are forwarded by the accessing<br />
user module.<br />
The flickering is defined by the user’s entries.<br />
yellow flashing A firmware update is carried out.<br />
Mouse<br />
DVI/VGA Out Micro In Speaker Keyb./Mouse Keyb. Red. Power<br />
Main Power<br />
G&D <strong>DVICenter</strong> · 36
Change language