G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
G&D DVICenter - Guntermann und Drunck GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
Connection to the central module<br />
<br />
User module »DVI-CON-MC4«<br />
<br />
Transmission 1: Use a category 5e (or better) twisted pair cable to connect this interface<br />
to one of the central module’s Dynamic Ports that is configured to connect a user<br />
module.<br />
NOTE: Note the instructions in the paragraph Connecting user modules to the central<br />
module provided in the installation guide of the matrix switch.<br />
NOTE: You can establish a direct connection between a target and a user module.<br />
Use a category 5e (or better) crossover cable to connect the modules.<br />
Transmission 2: Use a category 5e (or better) twisted pair cable to connect this interface<br />
to one of the central module’s Dynamic Ports that is configured to connect a user<br />
module.<br />
Transmission 3: Use a category 5e (or better) twisted pair cable to connect this interface<br />
to one of the central module’s Dynamic Ports that is configured to connect a user<br />
module.<br />
Transmission 4: Use a category 5e (or better) twisted pair cable to connect this interface<br />
to one of the central module’s Dynamic Ports that is configured to connect a user<br />
module.<br />
Power supply<br />
<br />
<br />
<br />
Main Power: Connect the supplied power cable.<br />
Insert the cable’s Schuko plug in a power socket.<br />
<br />
Red. Power: Connect the connection cable of a compatible power pack to provide the<br />
user module with a second, red<strong>und</strong>ant power supply.<br />
<br />
<br />
G&D <strong>DVICenter</strong> · 46