G&D DVICenter - Guntermann und Drunck GmbH

Target module »DVI-CPU-MC2-UC«
Status displays
The LED on the front panel of the user module inform you about the status of the
external power pack:
LED Status Meaning
Power on The external power pack is connected and the required voltage (12 Volt)
is available.
The flashing Transmission LEDs highlight the following operating statuses of the
particular connection:
19 · G&D DVICenter
off The external power pack is not (properly) connected.
LED Status Meaning
Yellow Off No user module accesses the target module.
On A user module accesses the target module.
Blinking The incoming video signal was not detected.
Flashing No voltage at PS/2 interface or USB bus.
Green Off The target module is turned off.
Blinking The power pack is connected and supplies the required power.
The connection to the central module could not be established.
Flashing The connection to the central module is established.
No user module is accessing or the computer is turned off.
On A user module accesses the target module.
A computer is connected and turned on.
Flickering Keyboard and mouse inputs are transmitted by the accessing user module.
The flickering is defined by the user’s inputs.